|
CPU board - Support Intel® LGA 775 CoreTM 2 Dual, Pentium® 4,
Celeron® and Celeron® D CPU series
- Intel® 82945G chipset with 1066/800/533 MHz FSB
System Memory - Dual-channel DDR2 with two 240-pin DIMM sockets
- Supports DDR2 667/533, un-buffered, none ECC up to
4GB
Ethernet Port - Two PCI-E x1 GbE interfaces with 2 RJ45 connectors
- Four PCI-E x4 GbE interfaces with 2 RJ45 and 2 SFP
connectors
- Up to 4 PCI-E x4 GbE with RJ45, SFP or dual personality
expandable
Bypass feature - Up to 2 Gen 2.0 bypass segments available
Expansion Slot - One PCI32 slot for proprietary PCI card and internal
installation
- Additional PCI-E, PCI-X slot expandable for project
Storage Device - One 3.5" SATA HDD as default, up to two installable
- One onboard compact flash socket for type-I CF card,
supports DMA mode
- One 40-pin IDE connector supports DOM (Disk on Module)
- One removable 3.5" HDD design ready for project based
request
Serial Port - One front accessible RJ45 connector for system console
- One internal 2x5 pin-header for connection with EZIO or
preferred device
LCD Panel 2x16 characters LCD module with 4 buttons
LEDs Power status, storage access, Ethernet status/speed and
bypass status
USB Dual USB 2.0 ports, front accessible
VGA Built-in on-board 2x5 pin-header
Power Full-range 220W ATX PSU
Dimension 443 (W) x 406 (D) x 44.5 (H) mm
17.4"(W) x 16"(D) x 1.73" (H)
Operating Environment - Temperature: 5~40°C (67~130°F)
- Humidity 20%~90% RH
Storage Environment - Temperature -20~70°C (58~184°F)
- Humidity 5%~95% RH
Certification CE/FCC/UL/cUL |
