|
| |
 |
| |
|
|
|
|
JSP503-B-G
|
| |
 |
| |
* |
5 PCI slots with an additional AGP slot
|
| |
* |
Socket 478 CPU at 533MHz FSB |
| |
* |
Integrated video
|
| |
* |
Integrated LAN
|
| |
* |
Up to 2GB DDR RAM
|
| |
* |
Onboard SATA ports
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
| |
PROCESSOR (Socket 478-based Intel®)
• Intel® Pentium® 4 Processor with
Hyper-Threading Technology
– 800/533MHz system data bus
• Intel® Pentium® 4 Processor
– 533/400MHz system data bus
• Intel® Celeron® Processor
– 400MHz system data bus
CHIPSET
• Intel® 865G chipset
– Intel® Chipset Graphics Memory Controller Hub (GMCH)
– Intel® 82801EB I/O Controller Hub (ICH5)
SYSTEM MEMORY
• Supports dual channel (128-bit wide) memory interface
– Each channel supports 2 DIMM sockets
• Supports maximum of 4GB system memory
• Supports Dynamic mode to optimize system performance
• Synchronous operation with processor system bus
– PC2100/PC2700/PC3200 (DDR266/DDR333/DDR400)
with 800MHz FSB CPU
DDR333 will run at 320MHz memory frequency
when used with 800MHz FSB CPU
– PC2100/PC2700 (DDR266/DDR333)
with 533MHz FSB CPU
– PC2100 (DDR266) with 400MHz FSB CPU
• Supports non-ECC (x64) DIMM using 128Mb, 256Mb,
or 512Mb
• Supports unbuffered DIMMs
BIOS
• Award BIOS, Windows® 98SE/2000/ME/XP
Plug and Play compatible
• Supports SCSI sequential boot-up
• Flash EPROM for easy BIOS upgrades
• Supports DMI 2.0 function
• 4Mbit flash memory
ENERGY EFFICIENT DESIGN
• Supports ACPI specification and OS Directed
Power Management
• Supports ACPI STR (Suspend to RAM) function
• Wake-On-Events include:
– Wake-On-PS/2 Keyboard/Mouse
– Wake-On-USB Keyboard
– Wake-On-Ring (external modem)
– Wake-On-LAN
– RTC timer to power-on the system
• System power management supported
• CPU stopped clock control
• Microsoft®/Intel® APM 1.2 compliant
• Soft Power supported - ACPI v1.0a specification
• AC power failure recovery
DAMAGE FREE INTELLIGENCE
• Monitors CPU/system temperature and overheat alarm
• Monitors 5VSB(V)/VBAT(V)/1.5V/3.3V/5V/±12V/CPU(V)
voltages and failure alarm
• Monitors CPU/2nd fan speed and failure alarm
• Read back capability that displays temperature,
voltage, and fan speed
• Opened chassis alarm
ONBOARD GRAPHICS FEATURES
• Graphics Memory
– Shares 1MB/4MB/8MB/16MB/32MB of the system
memory in DOS mode
– Uses Dynamic Video Memory Technology (DVMT)
in Windows mode
• Graphics controller
– Core frequency of 266MHz
– 350MHz integrated 24-bit RAMDAC
– Analog display up to 2048x1536 @ 60Hz refresh
– 3D setup and render engine - Discrete, Triangles,
Strips and fans
– Per pixel perspective corrected texture mapping
– Software DVD at 30fps, full screen
• 2D graphics features
– Optimized 256-bit BLT engine
– 32-bit alpha blended cursor
– Programmable 3-color transparent cursor
• 3D graphics features
– 200 megapixels/sec fill rate
– Maximum 3D resolution: 1600x1200x32 @ 85Hz
– Flat and Gouraud shading
– 16- and 24-bit Z-buffering and 16- and 24-bit W-buffering
– Vertex and programmable pixel fogging and
atmospheric effects
– Double and triple render buffer
• Software drivers
– Windows® 98SE/2000/ME/XP
– Windows NT® 4.0
ONBOARD AUDIO FEATURES
• 18-bit stereo full-duplex codec with independent
variable sampling rate
• High quality differential CD input
• S/PDIF-out interface
• 2-channel audio output
ONBOARD LAN FEATURES
• Uses Realtek RTL8101L fast ethernet controller
• Integrated IEEE 802.3, 10BASE-T and 100BASE-TX
compatible PHY 32-bit PCI master interface
• Integrated power management functions
• Full duplex support at both 10 and 100 Mbps
• Supports IEEE 802.3u auto-negotiation
• Supports wire for management
PCI IDE INTERFACE
• Supports ATA/33, ATA/66 and ATA/100 hard drives
• PIO Mode 4 Enhanced IDE (data transfer rate
up to 14MB/sec.)
• Bus mastering reduces CPU utilization during disk transfer
• Supports ATAPI CD-ROM, LS-120 and ZIP
SATA IDE INTERFACE
• Supports two SATA (Serial ATA) interfaces which are
compliant with SATA 1.0 specification (1.5Gbps interface)
ACCELERATED GRAPHICS PORT (A.G.P.)
• Supports 1.5V AGP 8x (2.13GB/sec.) and AGP 4x
(1066MB/sec.) for 3D graphics applications
(AGP 2x and 3.3V AGP card are not supported)
Supports AGP 3.0 and AGP 2.0 spec
REAR PANEL I/O PORTS
• 2 USB 2.0/1.1 ports
• 1 RJ45 LAN port
• 1 DB-9 serial port
• 1 DB-15 VGA port
• 1 DB-25 parallel port
• 1 mini-DIN-6 PS/2 mouse port
• 1 mini-DIN-6 PS/2 keyboard port
• 1 game port
• 3 audio jacks: line-out, line-in and mic-in
I/OCONNECTORS
• 3 connectors for 6 additional external USB 2.0/1.1 ports
• 1 connector for 1 external serial port
• 1 front audio connector for external line-out and mic-in jacks
• 1 CD-in internal audio connector
• 1 S/PDIF-out connector (audio digital interface)
• 1 connector for IrDA interface
• 2 Serial ATA, 2 IDE and 1 floppy connectors
• 2 ATX power supply connectors
• 1 Wake-On-LAN connector
• 1 chassis open connector
• 3 fan connectors for CPU fan, chassis fan and 2nd fan
EXPANSION SLOTS
• 1 AGP slot; 1.5V
• 5 PCI slots
COMPATIBILITY
• PCI 2.2 and AC ´97 compliant
PCB
• 4 layers, ATX form factor
• 30.5 cm (12.05") x 21 cm (8.26")
SAFETY
• UL, cUL, FCC Class B, CE |
| |
| |
| |
| |
|
Our Locations |
|
| |
|
| |
|
| |
| |
|
CompactPCI - CPCI
|
| Our 25X and 25+ models come with an extreme cooling package which is designed to increase airflow allowing the server to run at lower temperatures. This exclusive design can cool a server by as much as 60 degrees F in a 75 degree ambient. Heat Kills, especially in temperature-sensitve communications cards. Keep your cards cool with the 25X and 25+ series servers. |
|
| |
| |
* |
Increased density of cards = lower Total Cost of Ownership |
| |
* |
Lower temperature = less card failures |
| |
* |
Less downtime = more productivity |
|
| |
|
| |
|
| |
|
|
|
|
| |
| |
© 2008 Just Servers, Inc.
Division of Polaraco, Inc. |
|
JustServers.com
Division of Polaraco, Inc.
Wharton, NJ 07885
Tele: 973-989-5565 FAX: 973-366-9815 |
|
| |
| Custom servers, rackmount chassis, ISA passive backplane, Windows 2000, Dialogic Integration, PBX, IP PBX, Trixbox, Digium cards, CPCI, Compact PCI |
| |
|
